K-MAN Solutions

Cut Resistant Gloves Protector, Oeko-Tex® 100 Approved-116.0995

Cut Resistant Gloves Protector, Oeko-Tex® 100 Approved
Typhoon® and polyurethane coating

• Highly durable.
• Very good abrasion resistance and good cut protection.
• Good touch sensitivity.
• Economical version.

Suitable for:

Assembly work with high requirements to abrasion resistance and where there is risk of cut injuries.

Cut Resistant Gloves Protector, Oeko-Tex® 100 Approved-116.0995

Typhoon® and polyurethane coating

  • Cut level D, seamless knitted gloves made of HPPE and steel
  • fibres with PU coating on the palm. Gloves offer good protection against cuts and prove very abrasive-resistant. Excellent dexterity and very comfortable.

 

Storage/Transport:

  • The gloves are first packed in plastic bags which are subsequently packed in cardboard boxes for transport and storage.
  • Granberg recommends storing unused gloves in original packaging. Prevent direct sunlight.

 

Maintenance/Cleaning:

  • Both new and used gloves should be inspected before use, and before putting them on to make sure that there is no damage to them.
  • If in doubt, discard the gloves and select a new pair.
  • Leaving the gloves in a contaminated condition may cause a deterioration of quality.
  • Cleaning or disinfecting the gloves may also negatively affect quality.
  • The performance characteristics of gloves that have been worn or cleaned/disinfected/laundered may differ from the performance levels declared.
  • Gloves can only be cleaned with damp cloth, but it will not stop permeation processes.

 

Obsolescence:

  • When stored as recommended, unused gloves will not suffer any change in their mechanical properties for up to five years from the date of manufacture.
  • Service life depends on application and maintenance and cannot be specified.
  • It is the responsibility of the user to ascertain the suitability of the gloves for the user’s tasks.

 

Please note:

  • The gloves shall not be worn when there is a risk of entanglement with moving parts of machines.
  • Gloves meeting the requirement for resistance to puncture may not be suitable for protection against sharply pointed objects such as hypodermic needles.
  • None of the raw materials used in glove, or process of manufacturing it, are known to be harmful to the user.
  • These gloves are intended to protect hands in working environments in accordance with
  • EN 388:2016+A1:2018, ANSI/ISEA 105-2016 and EN ISO 21420:2020.
  • It is the responsibility of the user to evaluate and determine risks based on the intended application.
  • The gloves should only be used for applications declared suitable by the manufacturer.
  • Risk should be evaluated keeping in mind the protection levels and the harmonised standards on which gloves are tested.