Chemical Protective Gloves with Cut Resistance-114.9015
• Nitrile offering liquid-proof barrier and protection against a wide range of chemicals and high abrasion-resistant durability.
• EN 374:2016/Type A high chemical resistance. The Nitrile coating offers ≥ 480 minutes of permeation time for n-Heptane found in oil-based muds.
• High visibility green for maximum safety.
• Tested according to EN 388:2016 (mechanical and impact protection) and EN 374:2016 (chemical protection).
• Heat resistant up to 100°C for 15 seconds.
Oil & Gas: Upstream, Transportation, Downstream and Clean Up | Sewage/Draining Facilities | Water Treatment Facilities.
- Description
- Additional information
Description
Bonded with 360⁰ Anti-Cut Typhoon® Liner
- Chemical resistant gloves for use against hydrocarbons including petroleum derivatives.
- EN 388 cut protection 360 . Do not use with corrosive products.
- This glove is particularly recommended to be used to work on drill floors (related to rigs) when in contact with oil mud and other lubricants and chemicals.
Storage/Transport:
- The gloves are first packed in plastic bags which are subsequently packed in cardboard boxes for transport and storage.
- Granberg recommends storing unused gloves in original packaging. Prevent direct sunlight.
Maintenance/Cleaning:
- Both new and used gloves should be inspected before use, and before putting them on to make sure that there is no damage to them.
- If in doubt, discard the gloves and select a new pair. Leaving the gloves in a contaminated condition may cause a deterioration of quality.
- Cleaning or disinfecting the gloves may also negatively affect quality.
- The performance characteristics of gloves that have been worn or cleaned/disinfected/laundered may differ from the performance levels declared. Gloves can only be cleaned with damp cloth, but it will not stop permeation processes.
Obsolescence:
- Service life depends on application and maintenance and cannot be specified.
- It is the responsibility of the user to ascertain the suitability of the gloves for the user’s task or tasks.
Please note:
- The gloves shall not be worn when there is a risk of entanglement with moving parts of machines.
- Gloves meeting the requirement for resistance to puncture may not be suitable for protection against sharply pointed objects such as hypodermic needles.
- None of the raw materials used in glove, or process of manufacturing it, are known to be harmful to the user. Do not expose to open flame.
- If the gloves become wet, do not use them to handle hot objects.
- For multi-layer gloves, performance level are applicable to the whole glove including all layers.
- These gloves are intended to protect hands in working environment in accordance with EN 388:2016+A1:2018, ANSI/ISEA 105-2016, EN ISO 374-1:2016+A1:2018/Type A, EN ISO 374-5:2016,, EN 407:2004 and EN 420:2003+A1:2009.
- It is the responsibility of the user to evaluate and determine risks based on the intended application.
- The gloves should only be used for applications declared suitable by the manufacturer.
- Risk should be evaluated keeping in mind the protection levels and the harmonised standards on which gloves are tested.
Additional information
| Product family | Nitrile Gloves |
|---|---|
| Category | Chemical Cut Resistant Gloves |
| Colour | Green |
| Standards | EN 420:2003 + A1:2009, EN 374:2016, EN 407:2004, ANSI/ISEA 105-2016, EN 388:2016+A1:2018, CE Cat.III |
| Lining Type | Fully Lined- Typhoon |
| Coating material | Nitrile |
| Fatures and Properties | Extra long, High visibility, Precision |
| Protection and Resistance | Abrasion Resistant, Chemical Protection, Cut Resistant, Waterproof, Oil Repellent, Puncture Resistant, Tear Resistant |
| Grip | Dry, Wet, Oil |
| Glove fit | Loose fit |
| Size | 8/M, 9/L, 10/XL, 11/XXL, 12/XXXL |
| Packaging Unit | Pair |
| Pieces Per Bundle | 6 |
| Application area | Agriculture, Building and Construction, Chemical, Maintenance, Oil, Gas and Mining, Waste/recycling |
| Length | 38 cm |
| Thickness | 1.55 mm |
